Yamaha FZ-09 Forum banner
Cancel
Create thread New Forums

2021 MT09 Windscreen Options...

Jump to Latest
61 - 80 of 136 Posts
#61 ·
Discussion starter · #65 ·
#68 ·
That actually looks pretty
bill64 said:
I'll buy this at September
www.mrashop.de

MT-09 /SP FZ-09 /SP - Racing windscreen "NRN" 2021-2023

NRN: Measuring 29 cm length and 32 cm width, the NRN racing screen by MRA is fastened onto the two existing holes on the handlebars via two metal…
www.mrashop.de www.mrashop.de
Click to expand...
bill64 said:
I'll buy this at September
www.mrashop.de

MT-09 /SP FZ-09 /SP - Racing windscreen "NRN" 2021-2023

NRN: Measuring 29 cm length and 32 cm width, the NRN racing screen by MRA is fastened onto the two existing holes on the handlebars via two metal…
www.mrashop.de www.mrashop.de
Click to expand...
That screen actually looks pretty good, clean, not too busy looking, and a little upper area coverage - cost around $142 USD.
 
#70 ·
MighTee9 said:
My Mustard Bikes windscreen arrived 18 days after placing the order (fine by me).
Click to expand...
That's the best 'screen' I've seen so far for what I want, which is just something to cover the ugly rear of the instrument cluster. I don't want a screen per say. Something like the Mustard but in dark acrylic, to look like an OEM screen would be perfect, but at least there's something decent (in black) to buy right now. Didn't know black was available, so glad to see that. Thank you for the pictures.
 
Discussion starter · #72 ·
Screan29 said:
Nice stuff. I have their [De Pretto] screen on my 2020.
Click to expand...
Did you buy it directly from De Pretto? If so, how expensive was shipping, etc.? And how was the overall buying experience? Or did you buy it elsewhere?

I see they have some stuff on Amazon, but the XSR900 screen I’m looking at isn’t one of them...
 
#73 ·
Dezoo said:
It's available in black colour only, ss finish for prototype only.
don't know why they still can't replace the photo in their listing as it's confusing

The original colour is black, but I added couple colours more
Click to expand...
Nice combo!! Do you have URL for the mirrors? I am saving all the available mirrors on my chrome bookmarks to decide which one I will buy in a few weeks.
 
#74 ·
Menchaca14 said:
Nice combo!! Do you have URL for the mirrors? I am saving all the available mirrors on my chrome bookmarks to decide which one I will buy in a few weeks.
Click to expand...
Mirrors are CRG Arrow's. I have them on mine, but opted to get new bar ends to mount them instead of a spacer that some are doing.
 
#75 ·
Moto26 said:
Did you buy it directly from De Pretto? If so, how expensive was shipping, etc.? And how was the overall buying experience? Or did you buy it elsewhere?

I see they have some stuff on Amazon, but the XSR900 screen I’m looking at isn’t one of them...
Click to expand...
I bought directly from them. Shipping was cheap and fast considering it came from Italy. I am looking to buy their chain guard next as it's metal as well rater than the plastic oem piece. They were great to deal with! I think I received the part in under a week if I remember correctly. It was faster than parts I ordered at the same time from CA.... very high quality!
 
#76 ·
Menchaca14 said:
Do you have URL for the mirrors?
Click to expand...
2021 MT09 Windscreen Options...
these are oxford, no modifications needed for installation, good quality
www.oxfordproducts.com

Oxford Bar End Mirrors

A pair of Bar End Mirrors designed to fit standard 7/8 (22.2mm) diameter bars.
www.oxfordproducts.com www.oxfordproducts.com

www.fz09.org

2021 MT09 Windscreen Options...

I figured the ‘21 headlight area would look better with a windscreen fitted. So far, I’ve seen a couple of the Yamaha branded screens, and I’m not too sure about them. So maybe this thread could be a good central source for people who are still looking, and those who have found one they like...
www.fz09.org www.fz09.org
some Chinese mirrors from ebay, no modifications needed for installation, average quality
www.ebay.com.au

Pair Motorcycle bike Bar End Mirrors Rear Side View Cafe Racer 7/8" Universal | eBay

Installation position: These mirrors usually have been installed on the motorcycle handlebar, they will not fit for install on the windscreen or other positions. - Fits for 7/8"(about 22mm) handlebar end with standard bar end insert.
www.ebay.com.au

additionally, I've tried these Black 7/8'' Handle Barend Motorcycle Mirrors for Honda Suzuki Yamaha Cafe Racer | eBay but they are requesting some mods or new bar ends
 
#77 ·
Screan29 said:
I am looking to buy their chain guard next as it's metal as well rater than the plastic oem piece.
Click to expand...
Hey, do you have a link for that? What I really don't like about the plastic OEM piece is how freaking HIGH it sits over the chain; looks like crap. Hopefully that metal one is closer to the chain, like most other motorcycles. Thanks.
 
#80 ·
bill64 said:
I'll buy this at September
www.mrashop.de

MT-09 /SP FZ-09 /SP - Racing windscreen "NRN" 2021-2023

NRN: Measuring 29 cm length and 32 cm width, the NRN racing screen by MRA is fastened onto the two existing holes on the handlebars via two metal…
www.mrashop.de www.mrashop.de
Click to expand...
That looks really good. Still not listed on Revzilla. Good thing I'm in Atlanta because "Georgia" is on their list of countries even if "United States of America" isn't. LOL
 
61 - 80 of 136 Posts
About this Discussion
135 Replies
48 Participants
Last post:
DNFDOUG
Yamaha FZ-09 Forum
posts
421K
members
25K
Since
2013
We’re the largest Yamaha forum for owners and enthusiasts of the FZ-09 and MT-09. The site has thousands of topics covering performance and reliability, photos, videos and more!
Full Forum Listing
Explore Our Forums
FZ/MT09 General Discussion FZ/MT09 Gear & Accessories FZ/MT09 Performance, Suspension & Braking: Yamaha FZ/MT09 Common Problems/Issues XSR900 General Discussion