Yamaha FZ-09 Forum banner

1 - 16 of 16 Posts

·
Registered
Joined
·
342 Posts
Discussion Starter #1 (Edited)
WORTH EVERY PENNY!!!!! LOL.....bet you thought it would be something else.....just got back from my ride...I have a akra ti and he loaded a akra carbon map....NEVER backfired/gurgled once I even tried to make it and it wouldn't, and before you say well the AIS was turned off, I had the graves plates installed with the pcv and got both....B mode I got reduced traction and its just as described a 400-600cc bike, you get on the gas hard and it goes though. Std I got smooth and that's exactly what it is...A I got quick turn and I am honestly going back to stock A but that's just my preference, nothing wrong with it but I just liked the stock A better...The cruise works and scared the hell out of me when I was testing all modes going through the gears, LOL....wasn't expecting it to latch and you know when it does.....Power wise I can roll on the gas in Std mode and wheelie before I couldn't without a lot more throttle, so something has to be going on.... The engine braking although not much gone I do miss, I could tell it wasnt there in my ride today but im only in the 5% of riders who liked it from my readings...Lastly this guy has answered all my questions in a FAST manner and to me this is the most important thing, so have no worries, I hope to get on the dyno this week if I can will post the results....SAFE RIDING EVERYONE!!!!
 

·
Registered
Joined
·
601 Posts
Thanks for the review.

I have the Akra Ti. Surprised the Akra carbon map works for it. But I'm glad to hear it.

I also have the Graves block-off plates and electronic jet kit.
 

·
Registered
Joined
·
520 Posts
Does it remove speed limiters? ... And does it upload a fuel injection dyno table for max torque and hp with akra carbon?

Was the quick turn A mode too tamed? Can i only smooth out 1st and 3nd gear in A mode slightly?
 

·
Registered
Joined
·
342 Posts
Discussion Starter #7
Does it remove speed limiters? ... And does it upload a fuel injection dyno table for max torque and hp with akra carbon?

Was the quick turn A mode too tamed? Can i only smooth out 1st and 3nd gear in A mode slightly?
google vcyclenut flash his site explains it all
 

·
Registered
Joined
·
520 Posts
Ooh, looks lovely.. It certainly answeredsome questions but what exactly does reduced traction and quick turn options entail... And is it possible for me to have a mode left stock but introduce b mode's 1st gear to it (basically b mode 1st gear and a mode 2-6)?

My apologies for multiple questions in advance.

I do plan on getting this but im going to wait a few weeks when temp drops more to hang up the bike.
 

·
Vendor
Joined
·
1,012 Posts
Does it remove speed limiters? the option is available

And does it upload a fuel injection dyno table for max torque and hp with akra carbon?yes

Was the quick turn A mode too tamed? Can i only smooth out 1st and 3nd gear in A mode slightly?
I can do whatever you want, but I need you to be very descriptive when explaining it, as in throttle position and rpm. Just a good fuel map will smooth it out some.
 

·
Vendor
Joined
·
1,012 Posts
Ooh, looks lovely.. It certainly answeredsome questions but what exactly does reduced traction and quick turn options entail... And is it possible for me to have a mode left stock but introduce b mode's 1st gear to it (basically b mode 1st gear and a mode 2-6)?

reduced traction slows down the throttle response so you have to give larger inputs to get the same response, this makes the bike very smooth and less likely to break traction

my quick turn is very linear the first 25% of the throttle and quickly ramps up to achieve 100% throttle around what would normally be 75%

no a mode can not be gear specific, its for all gears in that mode
My apologies for multiple questions in advance.

no worries at all!!

I do plan on getting this but im going to wait a few weeks when temp drops more to hang up the bike.
sweet let me know!
 

·
Registered
Joined
·
406 Posts
I just got my ECU back this morning and threw it in the bike. The bike runs great, thanks to vcyclenut, you are good at what you do. And, damn this akra exhaust is loud with the plug out. :D
 

·
Registered
Joined
·
16 Posts
vcyclenut, whats you average turn around time? are you able to delete the std and B mode? haveing modes is cool but i only need one mode, fast mode lol. i just hate having to switch through the modes everytime you start the bike
 

·
Registered
Joined
·
406 Posts
vcyclenut, whats you average turn around time? are you able to delete the std and B mode? haveing modes is cool but i only need one mode, fast mode lol. i just hate having to switch through the modes everytime you start the bike
I mailed mine out on a Saturday, and it would have been back on Saturday, but I wasn't here to sign. That is from Cali to Florida and back.
 

·
Registered
Joined
·
406 Posts
It is great. He did a fantastic job. In A mode the bike is on fire, standard mode the bike feels like it did before, just with more power, and B mode is very subdued.
 

·
Vendor
Joined
·
1,012 Posts
vcyclenut, whats you average turn around time? are you able to delete the std and B mode? haveing modes is cool but i only need one mode, fast mode lol. i just hate having to switch through the modes everytime you start the bike
one day.

no I cant delete them but I could make them all the same,

but I can also make it start in A mode, which is the fastest mode and you could only switch if you wanted to.

check out my site vcyclenut.com I let you configure the flash how ever you want
 
1 - 16 of 16 Posts
About this Discussion
15 Replies
8 Participants
vcyclenut
Yamaha FZ-09 Forum
We’re the largest Yamaha forum for owners and enthusiasts of the FZ-09 and MT-09. The site has thousands of topics covering performance and reliability, photos, videos and more!
Full Forum Listing
Top