Yamaha FZ-09 Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
205 Posts
Discussion Starter · #1 ·
Have OES sliders delivered today. What is torque value for both rear and forward engine mount bolts? Also, I've always had a center stand. Is it okay to install one bolt at a time on the side stand?

Thanks!
 

·
Registered
Joined
·
34 Posts
In my search for sliders, I seem to recall someone saying it was 33 lb/ft - here's a link to the thread

Check the owners manual if you have one, though, just to double check.
 

·
Registered
Joined
·
160 Posts
I also found 33 lb/ft although I don't recall where. They went in just fine and that felt comparable to the engine bolts I removed, but I only put on the fronts so the rears could be slightly different.

It's no problem on the side stand either. Just do one at a time so the holes stay lined up and you'll be good.
 

·
Registered
Joined
·
205 Posts
Discussion Starter · #4 ·
Thanks all….Easiest slider install I've ever done. Can't believe there was no kind of thread locker residue on the stock bolts. Believe all my other Yamahas had some.
 
1 - 4 of 4 Posts
Top