Yamaha FZ-09 Forum banner

1 - 15 of 15 Posts

·
Registered
Joined
·
136 Posts
Discussion Starter · #1 ·
So I'm about to start working on my bike. Need to change oil pan after problematic oil change, you can read about it in previous thread I made.
Got few tips from you guys. It sounds like I might be able to get it done :)

If anybody has any more tips, please share. I'll be between garage and my comp.
 

·
Registered
Joined
·
1,744 Posts
The stock exhaust is a pain to get off. Just be patient and you'll get it.
 

·
Registered
Joined
·
136 Posts
Discussion Starter · #3 ·
The stock exhaust is a pain to get off. Just be patient and you'll get it.
Just got exhaust off :)
When you put new pan on, do you put some grease on the bolts ? That was one thing somebody was recommending, spray it with grease or use some oil to prevent corrosion.
Do you put anything with the gasket or just gasket by itself ?
 

·
Registered
Joined
·
1,744 Posts
Gasket by itself and used loctite on bolts. In the service manual there is a diagram of what needs grease, loctite, sealant, etc.
 

·
Registered
Joined
·
136 Posts
Discussion Starter · #5 ·
Gasket by itself and used loctite on bolts. In the service manual there is a diagram of what needs grease, loctite, sealant, etc.
So I guess blue loctite would be fine ?
It would be nice to have that service manual ...
 

·
Registered
Joined
·
1,744 Posts
Hold on
 

·
Registered
Joined
·
1,744 Posts

·
Registered
Joined
·
1,744 Posts
It works. I promise. And yes, without an account it's 30 mins or so.
 

·
Registered
Joined
·
136 Posts
Discussion Starter · #12 ·
I need a break anyway. Got hungry meantime.
Pan is off now. Work is going slowly. Phone was ringing and other things coming up same time I'm trying to work lol
 

·
Registered
Joined
·
136 Posts
Discussion Starter · #14 ·
Got a lot of work done today. New pan is on. Will have to test it tomorrow maybe ? Spend good few hours on it. It was hot as hell today too so that didn't help.
Luckily I got my buddy to help me finish up. Extra hands make it easier.
 

·
Registered
Joined
·
136 Posts
Discussion Starter · #15 ·
Just to follow up. Did couple rides after finishing. Looks like everything is working fine. Thx for help guys !
 
1 - 15 of 15 Posts
Top