Yamaha FZ-09 Forum banner

1 - 10 of 10 Posts

·
Registered
Joined
·
111 Posts
I am assuming that they will work with the yoshi eliminator kit?
You will need adapters for the bracket. I have seen some using washers painted black
 

·
Registered
Joined
·
1,242 Posts
You will not need adapters, the signals come with everything you will need to install them.

Personally, I felt the signals were a little too hidden by the plate, so I used the base of the stock signals to move them outward a little.



 

·
Registered
Joined
·
14 Posts
Discussion Starter · #8 ·
Finally got mine in works like a charm just have to reassemble - out of curiosity, where did you end up strapping the resistors, and had any problems with them thus far?

You will not need adapters, the signals come with everything you will need to install them.

Personally, I felt the signals were a little too hidden by the plate, so I used the base of the stock signals to move them outward a little.



 

·
Registered
Joined
·
1,242 Posts
I did not use the resistors, I just replaced the flasher relay with this so I wouldn't need them. The resistors are too bulky, IMHO.

Here's the location of the flasher relay if you want to do the same.




.....and no problems so far.
 

·
Registered
Joined
·
14 Posts
Discussion Starter · #10 ·
Sweet man - thanks a ton for that. Ordered and I'll deal with the quick flash for the time being. Thanks again.
 
1 - 10 of 10 Posts
Top