Yamaha FZ-09 Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
135 Posts
Discussion Starter #1
remove tail light ,turn signals,rear body panels, cut the mount at an angle you want, I used 1/8 x1 1/4 mild steel weld to the mount, bend 90 deg. ends, drill for turn signals and license plate . I used the stock turn signals had to take off the soft rubber spacer. hope this helps ! had to post 3 times to fit it all see all 3 and photos
 
1 - 4 of 4 Posts
Top