Yamaha FZ-09 Forum banner
1 - 11 of 11 Posts

·
Registered
Joined
·
4,574 Posts
Discussion Starter · #1 · (Edited)
I dug through the service manual for the wiring colors to the front and rear blinkers and created a cheat sheet for those of you that use aftermarket lights like me. I am sharing a copy of the spreadsheet that I made to efficiently wire up two and three wire aftermarket blinkers. I plan on making Yamaha wiring connectors for my wife's bike so that I can quickly swap the stock blinkers out without having to use Posi-taps. Also, I recommend that you use Alligator clip wire testors before you permanently connect the wires.

Updated

Text Font Line Diagram Parallel
 

·
Registered
Joined
·
4,574 Posts
Discussion Starter · #5 · (Edited)

·
Registered
Joined
·
11 Posts
Hey Doug, BOTH my front signal wires are Red, Blue, and Brown. I have a 2016 fz-09 and am ready to solder the Proton 500 front signals on and now I'm confused.

Edit: Trial and error led to me finding that for my bike the signals are as follows:

Stock > Proton 500
Brown > Black
Blue > Red
Red > Yellow
 
1 - 11 of 11 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top