[Bub]

Hey guys. Hopefully I'm posting in the right place. I took the baffle out of my Akra a while back and misplaced the little screw that held the baffle inside of the can. Does anyone happen to know the size of the screw?

 

[Chris_py]

Bring the baffle with you and go to home depot or lowes. Their hardware section should have the screws you need.

 

[Keef]

probably m5 or m6 at a guess. Measure the hole, it is the same size as the bolt (ish).

as in, an M6 is 6mm, hole will be 6.1mm
M5, 5mm, 5.1mm hole.
Usually a fine thread, not coarse.

 

[Bub]

probably m5 or m6 at a guess. Measure the hole, it is the same size as the bolt (ish).

as in, an M6 is 6mm, hole will be 6.1mm
M5, 5mm, 5.1mm hole.
Usually a fine thread, not coarse.

Thank you!