Search Results for ‘throttle body’

Hi y'all, I want to check if my throttle bodies are sync'd in my XSR900 (2019). It's currently at around 17,000km, bought new at 0km. My thought was to use an OBD2 reader to try and see if any vacuum pressure sensors have a digital reading to save time, rather than pulling my bike apart to...

Hi, can somebody tell me where this hose needs to be fitted and what its purpose is? Thanks on forehand!

Hi everyone, I have an MT-09 engine mounted in a cross-car for rallycross, last weekend at the race we had several issues. The engine stalled during the race and was hard to fire up again at the next heat the engine just gave full throttle out of nowhere and I cut the power as quickly as...

I removed my throttle bodies on my 2016 XSR900 in order to install a new Throttle cable. A move which allotted me a ton of room for my hands to get the two throttle cables properly dialed in - Butttttt . . . . .after loosening the top c clamps and a couple of the bottom installing the throttle...

Strange vibrations - 2019 MT09 7k miles I recently noticed a noticeable change in my bikes vibration. At first I thought it was my chain or tires. Took it to a local shop to have it looked at. The guy I talked to came out and checked my tire pressure and chain slack and said it seemed good...

Hello I’m brand new to the forum. I’m the second owner of a 2015 FJ-09 and unsure of the maintenance history. Bike has 13,000 miles on it. Made myself a sync tool using clear tuning and tranny fluid. Synchronized the throttle bodies last night and all 3 air bypass screws were turned all the way...

Hello All, I have read all the threads (most inactive by now) on syncing the throttle bodies on the nine and still have a question that seems unanswered: Does one check the TB sync with a tool with the air box on or off? It appears that most are doing the service without the air box fitted.The...