Yamaha FZ-09 Forum banner
master cylinder
1-4 of 4 Results
  1. MT-09 Forum
    I think the master cylinder looks crap on my 2021 MT09. Anyone thought of replacing with a Tenere or R6 or similar?
  2. FZ/MT09 Gear & Accessories
    The image below indicates that in order to adjust the breaking pressure from 19x20 to 19x18 is by simply rotating the adjuster screw by 180 degrees. Now lets say if I messed around with the adjuster screw but instead of going back and forth 180 degrees, I accidentally rotated it 360 degrees...
  3. Yamaha FZ/MT09 Common Problems/Issues
    Have what I believe to be a defective front brake master cylinder. This was originally on bike # 2. Problem is that it acts like it's sucking air, or something. The lever will randomly get soft in traffic and even start to drop to handlebar very close. A quick pump brings it back to a...
  4. Stoltec Moto
    Good news: Spiegler has developed brake line kits for the FZ-09. Better news: Stoltec Moto is running a group buy for these kits! Why upgrade to Spiegler brake lines on your bike? Several reasons come to mind: Firmer lever feel, due to reduced brake line swell as is typical with rubber...
1-4 of 4 Results
Top