Yamaha FZ-09 Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-14 of 15 Results
  1. FZ/MT09 General Discussion
    Does flashing the ECU void Yamaha's warranty?
  2. Yamaha FZ/MT09 Common Problems/Issues
    SOLVED: Ok, it's been solved. I guess when my ECU was being tuned it had to be added to the computer so it was physically cut to look inside the unit. No burns, no melts, not rubbing. It was cut into for the development tune and then refilled. No issues riding it either! Original Post: I know...
  3. FZ/MT09 General Discussion
    Hi, I have bought standard MT09 2015 without keys, immo, ECU, so I bought ECU (coincidentally) to MT09 tracer (2SC-8591A-60) and as I checked it should be 1RC-8591A. I also sent it to one guy who said that he disabled immo in this ECU. The problem is I don't have power supply on fuel pump...
  4. FZ/MT09 General Discussion
    Can't wait to see if it will hit 130hp when maps and dyno numbers come out.
  5. FZ/MT09 General Discussion
    Hi everyone, I have an MT-09 engine mounted in a cross-car for rallycross, last weekend at the race we had several issues. The engine stalled during the race and was hard to fire up again at the next heat the engine just gave full throttle out of nowhere and I cut the power as quickly as...
  6. FZ/MT09 General Discussion
    Hey guys, I'm curious what other people are reaching for top speed with an ecu flash. I seem to be topping out at 130-132 even after the flash. Granted, I am 6'6" 220lbs, that may have something to do with it but I feel I should still be able to 140mph. I saw a video where a guy hit 157mph on...
  7. Parts for Sale / Wanted
    For sale is a Power Commander V for 2014 - 2016 FZ09. Asking $200 plus shipping. Comes with all original cables and unit. Email me if you're interested: [email protected] Thanks for looking!
  8. FZ/MT09 Performance & Suspension
    Hello Guys, Paul here from Germany. I am doing a little project and I need your help. I consider to tune the fuel maps by myself. Therefore I need a good RPM signal to feed into my arduino. Some guys here had there bike on a dyno. Probably one of you has still in mind where the tuning dude...
  9. FZ/MT09 General Discussion
    I have a fz09 2017 and disarm it completely, when I arm it again the computer is not marking the speed on the screen, I bought the sensor that it carries but I do not know how to reset the computer, who can help me?? I want to know how i reset the ecu complete.
  10. FZ/MT09 Performance & Suspension
    Does anyone have experience with getting the flash tune harness and fiddling with the ECU themselves? I was going to go this route because I want to play around with it and be able to update the tune as I do mods as per $$ allows. My main question is that FT allows you to import several map...
  11. The Ride Report
    Don't do it! It is the wrong bike... The bike will handle poorly loaded with gear... It has terrible fuel range... Yes, some of the these comments are what I heard when I told my riding friends about taking the FZ-09 on an extended multi-state trip including to British Columbia. Can a...
  12. FZ/MT09 Performance & Suspension
    I recently purchased an Arrow full exhaust, graves block off plates, and a BMC air filter for my 14 FZ-09. I do not have a power commander or an O2 related product like a O2 optimizer or Dynojet autotune. What do I need to tune properly and who can I get to do, for example flash tune etc? Is...
  13. FZ/MT09 Performance & Suspension
    Ivan’s performance is my go to dyno tuning shop for motorcycles, because of the quality and thoroughness of the tuning he does. This guy designs and produces all of his own tuning components and carb parts, I don’t think there is anyone else in my area that could do a better job. I have ridden...
  14. FZ/MT09 Builds
    Skunk Werkz: Ohlins GSXR Shock, Fuel Syst / Line Mods, & Block Off Plate Alternative This is one of those situations where 1 thing leads to several others . ( Butterfly Effect ) Had just installed an M 4 slip on and a Gixxer 1000 Ohlins rear shock. This lead to the tank coming off to trim...
1-14 of 15 Results